OSHA Standards
- Part Number: 1910
- Part Number Title: Occupational Safety and Health Standards
- Standard Number: 1910
- Title: Table of Contents
- GPO Source: e-CFR
PART 1910 — OCCUPATIONAL SAFETY AND HEALTH STANDARDS
- 1 – Purpose and scope.
- 2 – Definitions.
- 3 – Petitions for the issuance, amendment, or repeal of a standard.
- 4 – Amendments to this part.
- 5 – Applicability of standards.
- 6 – Incorporation by reference.
- 7 – Definition and requirements for a nationally recognized testing laboratory.
- 7 App A – OSHA Recognition Process for Nationally Recognized Testing Laboratories.
- 8 – OMB control numbers under the Paperwork Reduction Act.
- 9 – Compliance duties owed to each employee.
OSHA 30 Hrs General Industry
OSHA 30 Hrs General Industry
OSHA Council -USA
Just @ Rs.10000/- only
OSHA 30 Hrs Construction Industry
OSHA 30 Hrs Construction Industry
OSHA Council -USA
Just @ Rs.10000/- only
Best Safety Institute in Delhi
Join Our Free Training Today
- 11 – Scope and purpose.
- 12 – Construction work.
- 15 – Shipyard employment.
- 16 – Longshoring and marine terminals.
- 17 – Effective dates.
- 18 – Changes in established Federal standards.
- 19 – Special provisions for air contaminants.
- 21 – Scope and definitions.
- 22 – General requirements.
- 23 – Ladders.
- 24 – Step bolts and manhole steps.
- 25 – Stairways.
- 26 – Dockboards.
- 27 – Scaffolds and rope descent systems.
- 28 – Duty to have fall protection and falling object protection.
- 29 – Fall protection systems and falling object protection-criteria and practices.
- 30 – Training requirements.
- 33 – Table of contents.
- 34 – Coverage and definitions.
- 35 – Compliance with alternate exit-route codes.
- 36 – Design and construction requirements for exit routes.
- 37 – Maintenance, safeguards, and operational features for exit routes.
- 38 – Emergency action plans.
- 39 – Fire prevention plans.
- 1910 Subpart E App – Exit Routes, Emergency Action Plans, and Fire Prevention Plans.
- 66 – Powered platforms for building maintenance.
- 66 App A – Guidelines (Advisory)
- 66 App B – Exhibits (Advisory)
- 66 App C – Reserved
- 66 App D – Existing Installations (Mandatory)
- 67 – Vehicle-mounted elevating and rotating work platforms.
- 68 – Manlifts.
- 94 – Ventilation.
- 95 – Occupational noise exposure.
- 95 App A – Noise exposure computation
- 95 App B – Methods for estimating the adequacy of hearing protector attenuation
- 95 App C – Audiometric measuring instruments
- 95 App D – Audiometric test rooms
- 95 App E – Acoustic calibration of audiometers
- 95 App F – Calculations and application of age corrections to audiograms
- 95 App G – Monitoring noise levels non-mandatory informational appendix
- 95 App H – Availability of referenced documents
- 95 App I – Definitions
- 97 – Nonionizing radiation.
- 98 – Effective dates.
- 101 – Compressed gases (general requirements).
- 102 – Acetylene.
- 103 – Hydrogen.
- 104 – Oxygen.
- 105 – Nitrous oxide.
- 106 – Flammable liquids.
- 107 – Spray finishing using flammable and combustible materials.
- 108 – Reserved
- 109 – Explosives and blasting agents.
- 110 – Storage and handling of liquefied petroleum gases.
- 111 – Storage and handling of anhydrous ammonia.
- 112 – Reserved
- 113 – Reserved
- 119 – Process safety management of highly hazardous chemicals.
- 119 App A – List of Highly Hazardous Chemicals, Toxics and Reactives (Mandatory).
- 119 App B – Block Flow Diagram and Simplified Process Flow Diagram (Nonmandatory).
- 119 App C – Compliance Guidelines and Recommendations for Process Safety Management (Nonmandatory).
- 119 App D – Sources of Further Information (Nonmandatory).
- 120 – Hazardous waste operations and emergency response.
- 120 App A – Personal protective equipment test methods.
- 120 App B – General description and discussion of the levels of protection and protective gear.
- 120 App C – Compliance guidelines.
- 120 App D – References.
- 120 App E – Training Curriculum Guidelines – (Non-mandatory)
- 121 – Reserved
- 122 – Table of contents
- 123 – Dipping and coating operations: Coverage and definitions
- 124 – General requirements for dipping and coating operations.
- 125 – Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 *F (93 *C).
- 126 – Additional requirements for special dipping and coating operations
- 132 – General requirements.
- 133 – Eye and face protection.
- 134 – Respiratory Protection.
- 134 App A – Fit Testing Procedures (Mandatory).
- 134 App B-1 – User Seal Check Procedures (Mandatory).
- 134 App B-2 – Respirator Cleaning Procedures (Mandatory).
- 134 App C – OSHA Respirator Medical Evaluation Questionnaire (Mandatory).
- 134 App D – (Mandatory) Information for Employees Using Respirators When not Required Under Standard.
- 135 – Head protection.
- 136 – Foot protection.
- 137 – Electrical Protective Equipment.
- 138 – Hand Protection.
- 139 – Reserved
- 140 – Personal fall protection systems.
- 1910 Subpart I App A – References for further information (Non-mandatory)
- 1910 Subpart I App B – Nonmandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection
- 1910 Subpart I App C – Personal Fall Protection Systems Non-Mandatory Guidelines.
- 1910 Subpart I App D – Test Methods and Procedures for Personal Fall Protection Systems Non-Mandatory Guidelines.
- 141 – Sanitation.
- 142 – Temporary labor camps.
- 143 – Nonwater carriage disposal systems. Reserved
- 144 – Safety color code for marking physical hazards.
- 145 – Specifications for accident prevention signs and tags.
- 145 App A – Recommended color coding
- 145 App B – References for further information
- 146 – Permit-required confined spaces.
- 146 App A – Permit-required Confined Space Decision Flow Chart
- 146 App B – Procedures for Atmospheric Testing.
- 146 App C – Examples of Permit-required Confined Space Programs
- 146 App D – Confined Space Pre-Entry Check List
- 146 App E – Sewer System Entry.
- 146 App F – Non-Mandatory Appendix F — Rescue Team or Rescue Service Evaluation Criteria
- 147 – The control of hazardous energy (lockout/tagout).
- 147 App A – Typical minimal lockout procedures
- 151 – Medical services and first aid.
- 151 App A – Appendix A to § 1910.151 — First aid kits (Non-Mandatory)
- 152 – Reserved
- 155 – Scope, application and definitions applicable to this subpart.
- 156 – Fire brigades.
- 157 – Portable fire extinguishers.
- 158 – Standpipe and hose systems.
- 159 – Automatic sprinkler systems.
- 160 – Fixed extinguishing systems, general.
- 161 – Fixed extinguishing systems, dry chemical.
- 162 – Fixed extinguishing systems, gaseous agent.
- 163 – Fixed extinguishing systems, water spray and foam.
- 164 – Fire detection systems.
- 165 – Employee alarm systems.
- 1910 Subpart L App A – Fire Protection
- 1910 Subpart L App B – National Consensus Standards
- 1910 Subpart L App C – Fire Protection references for further information
- 1910 Subpart L App D – Availability of publications incorporated by reference in section 1910.156 fire brigades
- 1910 Subpart L App E – Test methods for protective clothing
- 176 – Handling materials – general.
- 177 – Servicing multi-piece and single piece rim wheels.
- 177 App A – Trajectory
- 177 App B – Ordering Information for the OSHA Charts
- 178 – Powered industrial trucks.
- 178 App A – Powered industrial trucks.
- 179 – Overhead and gantry cranes.
- 180 – Crawler locomotive and truck cranes.
- 181 – Derricks.
- 183 – Helicopters.
- 184 – Slings.
- 211 – Definitions.
- 212 – General requirements for all machines.
- 213 – Woodworking machinery requirements.
- 214 – Cooperage machinery. Reserved
- 215 – Abrasive wheel machinery.
- 216 – Mills and calenders in the rubber and plastics industries.
- 217 – Mechanical power presses.
- 217 App A – Mandatory requirements for certification/validation of safety systems for presence sensing device initiation of mechanical power presses
- 217 App B – Nonmandatory guidelines for certification/validation of safety systems for presence sensing device initiation of mechanical power presses
- 217 App C – Mandatory requirements for OSHA recognition of third-party validation organizations for the PSDI standard
- 217 App D – Nonmandatory supplementary information
- 218 – Forging machines.
- 219 – Mechanical power-transmission apparatus.
- 241 – Definitions.
- 242 – Hand and portable powered tools and equipment, general.
- 243 – Guarding of portable powered tools.
- 244 – Other portable tools and equipment.
- 251 – Definitions.
- 252 – General requirements.
- 253 – Oxygen-fuel gas welding and cutting.
- 254 – Arc welding and cutting.
- 255 – Resistance welding.
- 261 – Pulp, paper, and paperboard mills.
- 262 – Textiles.
- 263 – Bakery equipment.
- 264 – Laundry machinery and operations.
- 265 – Sawmills.
- 266 – Logging operations.
- 266 App A – First-aid Kits (Mandatory).
- 266 App B – First-aid and CPR Training (Mandatory).
- 266 App C – Comparable ISO Standards (Non-mandatory)
- 268 – Telecommunications.
- 269 – Electric Power Generation, Transmission, and Distribution.
- 269 App A – Flow Charts.
- 269 App B – Working on Exposed Energized Parts.
- 269 App C – Protection From Hazardous Differences in Electric Potential
- 269 App D – Methods of Inspecting and Testing Wood Poles.
- 269 App E – Protection From Flames and Electric Arcs.
- 269 App F – Work-Positioning Equipment Inspection Guidelines.
- 269 App G – Reference Documents.
- 272 – Grain handling facilities.
- 272 App A – Grain handling facilities
- 272 App B – National consensus standards
- 272 App C – References for further information
- 301 – Introduction.
- 302 – Electric utilization systems.
- 303 – General.
- 304 – Wiring design and protection.
- 305 – Wiring methods, components, and equipment for general use.
- 306 – Specific purpose equipment and installations.
- 307 – Hazardous (classified) locations.
- 308 – Special systems.
- 309 – Reserved
- 310 – Reserved
- 311 – Reserved
- 312 – Reserved
- 313 – Reserved
- 314 – Reserved
- 315 – Reserved
- 316 – Reserved
- 317 – Reserved
- 318 – Reserved
- 319 – Reserved
- 320 – Reserved
- 321 – Reserved
- 322 – Reserved
- 323 – Reserved
- 324 – Reserved
- 325 – Reserved
- 326 – Reserved
- 327 – Reserved
- 328 – Reserved
- 329 – Reserved
- 330 – Reserved
- 331 – Scope.
- 332 – Training.
- 333 – Selection and use of work practices.
- 334 – Use of equipment.
- 335 – Safeguards for personnel protection.
- 336 – Reserved
- 337 – Reserved
- 338 – Reserved
- 339 – Reserved
- 340 – Reserved
- 341 – Reserved
- 342 – Reserved
- 343 – Reserved
- 344 – Reserved
- 345 – Reserved
- 346 – Reserved
- 347 – Reserved
- 348 – Reserved
- 349 – Reserved
- 350 – Reserved
- 351 – Reserved
- 352 – Reserved
- 353 – Reserved
- 354 – Reserved
- 355 – Reserved
- 356 – Reserved
- 357 – Reserved
- 358 – Reserved
- 359 – Reserved
- 360 – Reserved
- 361 – Reserved
- 362 – Reserved
- 363 – Reserved
- 364 – Reserved
- 365 – Reserved
- 366 – Reserved
- 367 – Reserved
- 368 – Reserved
- 369 – Reserved
- 370 – Reserved
- 371 – Reserved
- 372 – Reserved
- 373 – Reserved
- 374 – Reserved
- 375 – Reserved
- 376 – Reserved
- 377 – Reserved
- 378 – Reserved
- 379 – Reserved
- 380 – Reserved
- 381 – Reserved
- 382 – Reserved
- 383 – Reserved
- 384 – Reserved
- 385 – Reserved
- 386 – Reserved
- 387 – Reserved
- 388 – Reserved
- 389 – Reserved
- 390 – Reserved
- 391 – Reserved
- 392 – Reserved
- 393 – Reserved
- 394 – Reserved
- 395 – Reserved
- 396 – Reserved
- 397 – Reserved
- 398 – Reserved
- 399 – Definitions applicable to this subpart.
- 1910 Subpart S App A – Reference Documents
- 401 – Scope and application.
- 402 – Definitions.
- 410 – Qualifications of dive team.
- 420 – Safe practices manual.
- 421 – Pre-dive procedures.
- 422 – Procedures during dive.
- 423 – Post-dive procedures.
- 424 – SCUBA diving.
- 425 – Surface-supplied air diving.
- 426 – Mixed-gas diving.
- 427 – Liveboating.
- 430 – Equipment.
- 440 – Recordkeeping requirements.
- 1910 Subpart T App A – Examples of conditions which may restrict or limit exposure to hyperbaric conditions
- 1910 Subpart T App B – Guidelines for scientific diving
- 1910 Subpart T App C – Alternative Conditions Under 1910.401(a)(3) for Recreational Diving Instructors and Diving Guides (Mandatory)
- 1910 Subpart U – Reserved
- 1910 Subpart V – Reserved
- 1910 Subpart W – Reserved
- 1910 Subpart X – Reserved
- 1910 Subpart Y – Reserved
- 1910 Subpart Z – Toxic and Hazardous Substances
- 1000 – Air contaminants.
- 1000 TABLE Z-1 – TABLE Z-1 Limits for Air Contaminants.
- 1000 TABLE Z-2 – TABLE Z-2.
- 1000 TABLE Z-3 – TABLE Z-3 Mineral Dusts
- 1001 – Asbestos.
- 1001 App A – OSHA Reference Method – Mandatory
- 1001 App B – Detailed procedure for asbestos sampling and analysis – Non-Mandatory
- 1001 App C – Qualitative and quantitative fit testing procedures – Mandatory
- 1001 App D – Medical questionnaires; Mandatory
- 1001 App E – Classification of Chest X-Rays-Mandatory
- 1001 App F – Work practices and engineering controls for automotive brake and clutch inspection, disassembly, repair and assembly — Mandatory
- 1001 App G – Substance Technical Information for Asbestos-Non-Mandatory
- 1001 App H – Medical Surveillance Guidelines for Asbestos Non-Mandatory
- 1001 App I – Smoking Cessation Program Information For Asbestos – Non-Mandatory.
- 1001 App J – Polarized Light Microscopy of Asbestos — Non-Mandatory
- 1002 – Coal tar pitch volatiles; interpretation of term.
- 1003 – 13 Carcinogens (4-Nitrobiphenyl, etc.).
- 1004 – alpha-Naphthylamine.
- 1005 – Reserved
- 1006 – Methyl chloromethyl ether.
- 1007 – 3,’-Dichlorobenzidine (and its salts).
- 1008 – bis-Chloromethyl ether.
- 1009 – beta-Naphthylamine.
- 1010 – Benzidine.
- 1011 – 4-Aminodiphenyl.
- 1012 – Ethyleneimine.
- 1013 – beta-Propiolactone.
- 1014 – 2-Acetylaminofluorene.
- 1015 – 4-Dimethylaminoazobenzene.
- 1016 – N-Nitrosodimethylamine.
- 1017 – Vinyl chloride.
- 1017 App A – Supplemental medical information
- 1018 – Inorganic arsenic.
- 1018 App A – Inorganic arsenic substance information sheet
- 1018 App B – Substance technical guidelines
- 1018 App C – Medical surveillance guidelines
- 1020 – Access to employee exposure and medical records.
- 1020 App A – Sample authorization letter for the release of employee medical record information to a designated representative (Non-mandatory)
- 1020 App B – Availability of NIOSH registry of toxic effects of chemical substances (RTECS)(Non-mandatory)
- 1024 – Beryllium.
- 1024 App A – Appendix A to § 1910.1024-Operations for Establishing Beryllium Work Areas
- 1025 – Lead.
- 1025 App A – Substance data sheet for occupational exposure to lead
- 1025 App B – Employee standard summary
- 1025 App C – Medical surveillance guidelines
- 1025 App D – Qualitative fit test protocols
- 1026 – Chromium (VI).
- 1026 App A – Chromium (VI)
- 1027 – Cadmium.
- 1027 App A – Substance Safety Data Sheet – Cadmium
- 1027 App B – Substances Technical Guidelines for Cadmium
- 1027 App C – Qualitative and Quantitative Fit Testing Procedures
- 1027 App D – Occupational Health History Interview With Reference to Cadmium Exposure
- 1027 App E – Cadmium in Workplace Atmospheres
- 1027 App F – Nonmandatory Protocol for Biological Monitoring
- 1028 – Benzene.
- 1028 App A – Substance safety data sheet, Benzene
- 1028 App B – Substance technical guidelines, Benzene
- 1028 App C – Medical surveillance guidelines for Benzene
- 1028 App D – Sampling and analytical methods for Benzene monitoring and measurement procedures
- 1028 App E – Qualitative and Quantitative fit testing procedures
- 1029 – Coke oven emissions.
- 1029 App A – Coke oven emissions substance information sheet
- 1029 App B – Industrial hygiene and medical surveillance guidelines
- 1030 – Bloodborne pathogens.
- 1030 App A – Hepatitis B Vaccine Declination (Mandatory)
- 1043 – Cotton dust.
- 1043 App A – Air sampling and analytical procedures for determining concentrations of cotton dust
- 1043 App B-I – Respiratory questionnaire
- 1043 App B-II – Respiratory questionnaire for non-textile workers for the cotton industry
- 1043 App B-III – Abbreviated respiratory questionnaire
- 1043 App C – Reserved
- 1043 App D – Pulmonary Function Standards for Cotton Dust Standard
- 1043 App E – Vertical elutriator equivalency protocol
- 1044 – 1,2-dibromo-3-chloropropane.
- 1044 App A – Substance safety data sheet for DBCP
- 1044 App B – Substance technical guidelines for DBCP
- 1044 App C – Medical surveillance guidelines for DBCP
- 1045 – Acrylonitrile.
- 1045 App A – Substance safety data sheet for acrylonitrile
- 1045 App B – Substance technical guidelines for acrylonitrile
- 1045 App C – Medical surveillance guidelines for acrylonitrile
- 1045 App D – Sampling and analytical methods for acrylonitrile
- 1047 – Ethylene oxide.
- 1047 App A – Substance safety data sheet for ethylene oxide (non-mandatory)
- 1047 App B – Substance technical guidelines for ethylene oxide (Non-mandatory)
- 1047 App C – Medical surveillance guidelines for ethylene oxide (Non-mandatory)
- 1047 App D – Sampling and analytical methods for ethylene oxide (Non-mandatory)
- 1048 – Formaldehyde.
- 1048 App A – Substance technical guidelines for formalin
- 1048 App B – Sampling strategy and analytical methods for formaldehyde
- 1048 App C – Medical surveillance – Formaldehyde
- 1048 App D – Nonmandatory medical disease questionnaire
- 1048 App E – Qualitative and quantitative fit testing procedures
- 1050 – Methylenedianiline.
- 1050 App A – Substance Data Sheet, for 4,4′-Methylenedianiline
- 1050 App B – Substance Technical Guidelines, MDA
- 1050 App C – Medical Surveillance Guidelines for MDA
- 1050 App D – Sampling and Analytical Methods for MDA Monitoring and Measurement Procedures
- 1050 App E – Qualitative and Quantitive Fit Testing Procedures
- 1051 – 1,3-Butadiene.
- 1051 App A – Substance Safety Data Sheet For 1,3-Butadiene (Non-Mandatory)
- 1051 App B – Substance Technical Guidelines for 1,3-Butadiene (Non-Mandatory)
- 1051 App C – Medical Screening and Surveillance for 1,3-Butadiene (Non-Mandatory)
- 1051 App D – Sampling and Analytical Method for 1,3-Butadiene (Non-Mandatory)
- 1051 App E – Reserved
- 1051 App F – Medical Questionnaires (Non-Mandatory)
- 1052 – Methylene Chloride.
- 1052 App A – Substance Safety Data Sheet and Technical Guidelines for Methylene Chloride.
- 1052 App B – Medical Surveillance for Methylene Chloride
- 1052 App C – Questions and Answers – Methylene Chloride Control in Furniture Stripping.
- 1053 – Respirable crystalline silica.
- 1053 App A – Methods of Sample Analysis.
- 1053 App B – Medical Surveillance Guidelines
- 1096 – Ionizing radiation.
- 1200 – Hazard Communication.
- 1200 App A – Health Hazard Criteria (Mandatory)
- 1200 App B – Physical Criteria (Mandatory)
- 1200 App C – Allocation Of Label Elements (Mandatory)
- 1200 App D – Safety Data Sheets (Mandatory)
- 1200 App E – Definition of “Trade Secret” (Mandatory)
- 1200 App F – Guidance for Hazard Classifications Re: Carcinogenicity (Non-Mandatory)
- 1201 – Retention of DOT markings, placards and labels.
- 1450 – Occupational exposure to hazardous chemicals in laboratories.
- 1450 App A – National Research Council Recommendations Concerning Chemical Hygiene in Laboratories (Non-Mandatory)
- 1450 App B – References (Non-Mandatory)
